Applicable model(s) D1, D1X, D1H, D100, COOLPIX5700, COOLPIX5000

Q.No.3008:	What are the system requirements for Nikon Capture 3?
Ans :	Windows Macintosh OS Windows XP Profeccional, Windows XP Home Edition, Windows 2000 Professional, Windows Millennium Edition (Me), Windows 98 Second Edition (SE) Mac OS 9.0.4 (note 1), 9.1, 9.2, Mac OS X (version 10.1.3 or later) CPU/Model Pentium 300 MHz or greater Mac, iMac DV, Power Macintosh G3 (Blue & White), Power Macintosh G4 or later, iBook, PowerBook G3 or later with built-in USB port RAM (Nikon Capture 3) ・ Windows XP, Mac OS X: 128 MB or more (256 MB or more recommended) ・ Mac OS 9: Memory allocation as follows--32 MB or more is recommended for Nikon Capture 3 Camera Control, 128 MB or more is recommended for Nikon Capture 3 Editor. ・ Other OS: 64 MB or more recommended (128 MB or more recommended when working with RAW images) RAM (Nikon View 5) 64 MB or more recommended (128 MB or more recommended when working with RAW images) Hard Disk 200 MB required for installation of Nikon Capture 3When running Nikon Capture 3, twice the capacity of the CF card used + 10 MB (for example, if an 8 MB CF card is used, 26 MB) of free hard disk space is required Monitor Resolution 800 X 600 or better with 16-bit color (65,000 colors) or better, 24-bit color (more than 16 million colors recommended) Interface IEEE 1394 (note 2) OHCI (Open Host-Controller Interface) IEEE 1394 interface board or card (note 3) for connection to D1, D1X, and D1H Built-in FireWire interface for connecting the D1, D1X, and D1H USB (note 4) When connecting the camera via USB a built-in USB interface is required. Supported digital cameras (note 5) ・ D1, D1X, and D1H, D100 ・ USB-equipped COOLPIX-series digital cameras Other ・ CD-ROM drive is required for installation ・ An Internet connection is required when using the image upload function. An e-mail program and connection is also required when using the E-mail function.
Note 1:	CarbonLib version 1.5 or later required.
Note 2:	The camera may not function as expected when connected to an IEEE 1394 hub.
Note 3:	See our list of interface boards and cards that have been tested and approved.
Note 4:	The camera may not function as expected when connected to a USB hub.
Note 5:	Camera Control in Nikon Capture 3 supports the D1, D1X, D1H, and D100 digital cameras only. Nikon Capture 3 Camera Control cannot be used when connecting the D100 digital camera to a Macintosh platform. Nikon Capture 3 Camera Control with D1-series cameras is not supported under Mac OS X version 10.1.4 or earlier.

---