Nikon Digital Imaging Customer First

Applicable model(s)

D2H, D1, D1X, D1H, D100

Q.No.1351:

Can the Bellows Focusing Attachment PB-6 be mounted on the camera?

Ans :

It is possible to mount the Bellows Focusing Attachment PB-6 on the camera, but it can only be used under the conditions listed in the chart below.
In addition, the following accessories are required when changing shooting orientation (vertical/portrait orientation or horizontal/landscape orientation) at mounting or removing the PB-6.

D2H, D1-series:
Auto Extension Ring (Depending upon shooting orientation, 2 Bellows Spacers PB-6D may be necessary.)

D100 (with MB-D100 attached):
Auto Extension Ring PK-13 and 2 Bellows Spacers PB-6D
*For more details, please see our complete accessories catalog.

БГCamera settings for the Bellows Focusing Attachment PB-6БД

	Focus Mode			Exposure mode		Metering system
	S / C	M (with electronic range finder)	M	БiD2H/D1 seriesБj		Matrix		Center-weighted/Spot
				P/S	A/M	Matrix
				БiD100Бj		3D	Ten-segment
				other than M	M	3D	Ten-segment
D2H^*1	-	БЫ^*2	БЫ	-	БЫ^*3	-	БЫ^*4	БЫ
D100	-	БЫ^*2	БЫ	-	Бв^*5	-	-	-
D1 series^*1	-	БЫ^*2	БЫ	-	БЫ^*3	-	-	БЫ

*1	Requires the PK-12 or PK-13 auto extension ring, the PB-6D may be required depending on camera orientation.
*2	With maximum effective aperture of f/5.6 or faster.
*3	Use preset aperture. In manual exposure mode, preset aperture using focusing attachment before determining exposure and taking photographs.
*4	Can be used only if lens focal length and maximum aperture are specified using Non-CPU lens data option in shooting menu
*5	Camera exposure meter cannot be used.